| 一台拉力试验机配多个传感器好不好 |
| 添加时间：2019/5/22 14:58:05 浏览次数： |
| 1、好的影响 1. Good impact 所谓好的影响，即产品较常规机型的优势。配置多个传感器就可以在一台机器上实现多种材料的拉伸、压缩、弯曲等力学性能检测。这样大大的为用户节约了预算，而且一台机器也不会占用较大的空间，特别适用于同种材料，但是其规格、强度、力值又相差较大的检测。 The so-called good impact is the advantage of products over conventional models. With multiple yamodai.37ix.com.cnmojuljs.37ix.com.cnzaoxingcz.37ix.com.cnwww.baodingjiaju.cnsensors, mechanical properties such as tension, compression and bending of various materials can be tested on a single machine. This greatly saves the user's budget, and a machine will not occupy a larger space, especially for the same material, but its specifications, strength and force value are quite different. 2、坏的影响 2. Bad effects 电子拉力试验机虽然可以任意的更换传感器，可是这并不代表只要将原有传感器卸载下来，然后在安装上新的传感器就万事大吉了，每个传感器都有其特定的力值、精度控制范围，一旦更换了传感器就要重新对传感器进行标定，这样原本简单的试验就变得复杂起来，而且如果用户频繁的更换传感器，那么势必也会加速传感器的损坏。 Although the electronic tension testing machine can change sensors arbitrarily, this does not mean that as long as the original sensors are unloaded and new sensors are installed, everything will be all right. hengshui.75ix.cnpaishuigou.37ix.com.cnEach sensor has its specific force value and precision control range. Once the sensors are replaced, the sensor will be calibrated again, so the original simple test will become more complex. And if the user changes the sensor frequently, it will certainly accelerate the damage of the sensor. |
| 上一页 解决金属拉力试验机方案 |
| 下一页 塑料拉力机维护与保养 |
Copyright © 技术支持：遨游网络