| 解决金属拉力试验机方案 |
| 添加时间：2019/6/3 13:53:55 浏览次数： |
| 解决金属拉力试验机方案是检查计算机与试验机的通讯线是否脱落;检查联机选择传感器是否选择正确; The solution of metal tension tester is to check whether the communication line between the computer and the tester is off or not, and to check whether the on-line selection sensor is selected correctly. 检查拉力机近的试验或操作键盘时拉力机传感器是否被撞过; 电脑试验机检查出现问题之前是否使用了软件的校准或标定功能;检查电脑拉力试验机是否手动更改过校准值、拉力机标定值或硬件参数中的其他信息。 Check whether the sensor of the tension machine has been collided during the near test or keyboard operation of the tension machine; check whether the software calibration or calibration function has been slzuranji.37ix.com.cn tuoliuta.37ix.com.cnchuchenqi.37ix.com.cn jiaqiao.37ix.com.cnchuguanblg.37ix.com.cnzengrenji.37ix.com.cnused before the problem occurs by the computer testing machine; check whether the computer tension testing machine has manually changed the calibration value, the calibration value of the tension machine or other information in the hardware parameters. |
| 上一页 拉力机拉伸试验 |
| 下一页 一台拉力试验机配多个传感器好不好 |
Copyright © 技术支持：遨游网络