| 橡胶拉力机 |
| 添加时间：2018/4/4 17:11:50 浏览次数： |
| 橡胶拉力机 Rubber pulling machine 该装置上有两个夹头，经过一系列传动机构与装在测量装置顶部的光电编码器连在一起，当两夹头间的距离发生变化时，带动光电编码器的轴旋转，光电编码器就会有脉冲信号输出。再由单片机对此信号进行处理，就可以得出试样的变形量。该仪器符合符合GB 18173.1-2000 高分子防水材料 第一部分 片材，QB/T2471-2000 聚丙烯（PP）挤出片材，QB/T2490-2000 聚乙烯（PE）挤出板材，土工合成材料 短纤针刺非锅造土工布GB/T17638-1998，土工合成材料 长丝纺粘针刺非织造土工布GB/T17639-1998，土工合成材料 长丝机织土工布GB/T17640-1998，土工合成材料 裂膜丝机织土工布GB/T17641-1998，土工合成材料 非织造复合土工膜GB/T17642-1998，土工合成材料 聚乙烯土工膜GB/T17643-1998，土工合成材料 聚氯以烯土工膜GB/T17688-1999，土工合成材料 塑料扁丝编织土工布GB/T17690-1999，QB/T 1130—91塑料直角撕裂性能试验方法等标准的要求。 The device has two chuck, through a series of transmission mechanism and the photoelectric encoder mounted on the top of the measuring device. When the distance between the two chuck changes, the axis of the photoelectric encoder is rotated, and the photoelectric encoder will have the pulse signal output. With the signal processed by SCM, the deformation of the specimen can be obtained. The instrument conforms to the first partial sheet of GB 18173.1-2000 polymer waterproof material, QB/T2471-2000 polypropylene (PP) extrusion sheet, QB/T2490-2000 polyethylene (PE) extrusion plate, geosynthetics short fiber needling non pot geotextile GB/T17638-1998, and geosynthetics long silk spunbonded needle nonwoven geotextile GB/T1 7639-1998, geotechnical synthetic material long silk woven geotextile GB/T17640-1998, geosynthetics cracking film woven geotextile GB/T17641-1998, geosynthetics nonwoven composite geomembrane GB/T17642-1998, geosynthetics polythene geomembrane GB/T17643-1998, geotextile aggregate for polychlorinated geomembrane GB/T17688-1999 Geosynthetics, plastic flat wire woven geotextiles GB/T17690-1999, QB/T 1130 - 91, plastic right angle tear test methods and other standard requirements. |
| 上一页 橡胶拉力机试验机的工作条件 |
| 下一页 橡胶拉力机 |
Copyright © 技术支持：遨游网络