| 橡胶拉力机功能 |
| 添加时间：2018/6/28 14:35:44 浏览次数： |
| 橡胶拉力机功能 Rubber pull machine function 1.测试标准模块化功能:提供使用者设定所需应用的测试标准设定，范围涵盖GB、ASTM、DIN、JIS、BS…等。测试标准规范。 1. test standard modularity function: provide user set the test standard setting for required application, covering GB, ASTM, DIN, JIS, BS... Wait. Test standard specification. 2. 试品资料:提供使用者设定所有试品数据，一次输入数据永久重复使用。并可自行增修公式以提高测试数据契合性。 2. test data: provide users with all test data, one input data permanently reused. The formula can be added to improve the compatibility of test data. 3. 双报表编辑:完全开放式使用者编辑报表，供测试者选择自己喜好的报表格式（测试程序新增内建EXCEL报表编辑功能扩展了以往单一专业报表的格局） 4. 各长度、力量单位、显示位数采用动态互换方式，力量单位T、Kg、N、KN、g、lb，变形单位mm、cm、inch。 3. double report editor: fully open user edit report form for the tester to choose the form of report that you like (the test program adds the built-in EXCEL report edit function to expand the previous single professional report pattern) 4. length, power unit, display digit use dynamic exchange method, power unit T, Kg, N, KN, G LB, deformable units mm, cm, inch. 5. 图形曲线尺度自动最佳化Auto Scale，可使图形以 最佳尺度显示。并可于测试中实时图形动态切换。具 有荷重-位移、荷重-时间、位移-时间、应力-应变 荷重-2点延伸图，以及多曲线对比。 5. automatically optimize the Auto Scale of graphics scale, so that graphics can be displayed at the best scale. It can also dynamically switch the real-time graphics in the test. It has load displacement, load time, displacement time, stress strain load -2 point extension diagram, and multi curve comparison. 6．测试结果可以EXCEL格式的数据形式输出。 6. test results can be exported in EXCEL format. 7．测试结束可自动存档、手动存盘，测试完毕自动求算最大力量、上、下屈服强度、滞后环法、逐步逼近法、非比例延伸强度、抗拉强度、抗压强度、任意点定伸长强度、任意点定负荷延伸、弹性模量、延伸率、剥离区间最大值、最小值、平均值、净能量、折返能量、总能量、弯曲模量、断点位移x%荷重、断点荷重X%位移、等等。 资料备份：测试数据可保存在任意硬盘分区。 7. the end of the test can be automatically archived and manually stored, and the maximum strength, upper and lower yield strength, hysteresis loop method, progressive approximation method, non proportional extension strength, tensile strength, compressive strength, arbitrary point fixed elongation strength, arbitrary point fixed load extension, elastic modulus, elongation, maximum stripping interval are calculated. Value, minimum, average value, net energy, reentry energy, total energy, bending modulus, breakpoint displacement x% load, breakpoint load X% displacement, etc. Data backup: test data can be saved in any hard disk partition. |
| 上一页 橡胶拉力机功能 |
| 下一页 拉力机夹具 |
Copyright © 技术支持：遨游网络